Internet | Intranet|  Directory |   WebMail |   E-Office |
Edit
Name : Dr. Leeladhar Nagdeve
Designation : Assistant Professor
Department : Department of Mechanical Engineering
Qualification : Ph.D. (IIT Kanpur)
Phone : +91-6267533911
Email ID : ldnagdeve@nitdelhi.ac.in

Position Held

Assistant Professor 
 

 

Qualification-fdjk

PhD (Mechanical Engineering) 2018 - specialization in Manufacturing Science
Indian Institute of Technology Kanpur

Awards & Honors

PhD Scholarship, Ministry of HRD, Government of India, 2012- 2018

Research

Sl. No.

Title of Project

Sponsoring Agency

Amount

Status (Completed / Ongoing)

PI / Co - PI

 
 

1

Development of Portable Near-dry  Electrical Discharge Machine

MHRD/AICTE New Delhi

8.95

Lakhs

Ongoing

Co-PI

 

2

Fretting Fatigue and Fretting Wear Behavior of Titanium Foam under Simulated Body Fluid Environment

MHRD/AICTE New Delhi

19.38 Lakhs

Ongoing

Co-PI

 

Administration

Publications

International Journals:

 

  1. Leeladhar Nagdeve, V.K. Jain and J. Ramkumar (2019) Development of inverse replica fixture for Nano-finishing of Knee Joint using R-MRAFF process, Journal of Micromanufacturing (JMF) doi.org/10.1177/2516598418811460, Vol. 2, Issue 1, Pages 35-41. (SAGE Publications)
  2. Leeladhar Nagdeve, V.K. Jain and J. Ramkumar, (2018) Differential finishing of freeform surfaces (Knee Joint) using R-MRAFF process & negative replica as a fixture, Machining Science and Technology, Vol. 22, Issue 4, Pages 671-695. (Taylor and Francis).
  3. Leeladhar Nagdeve, V.K. Jain and J. Ramkumar, (2018) Nanofinishing of freeform / sculptured surfaces: A Review, Journal of Manufacturing Review, Vol. 5, Issue 6, Pages 1-20. (Scopus).
  4. Leeladhar Nagdeve, V.K. Jain and J. Ramkumar (2017) Preliminary investigations into nano-finishing of freeform surface (femoral component) using inverse replica fixture, International Journal of Advanced Manufacturing Technology, DOI: org/10.1007/s00170-017-1459-7, Vol. 100, Issue 5–8, Pages 1081–1092. (Springer)
  5. Leeladhar Nagdeve, Ajay Sidpara, V.K. Jain and J. Ramkumar (2017) On the effect of relative size of magnetic particles and abrasive particles in MR fluid based finishing process, Machining Science and Technology, Vol. 22 Issue 3, Pages 493-506. (Taylor and Francis).
  6. Leeladhar Nagdeve, Jain V.K., Ramkumar J. (2016) Experimental Investigations into nano-finishing of freeform surfaces using negative replica of the knee joint,  Procedia CIRP 42, Pages 793 – 798. DOI:10.1016/j.procir.2016.02.321. (Elsevier).
  7. Leeladhar Nagdeve, V.K. Jain and J. Ramkumar (2016) Nano-finishing of freeform surfaces: A review, Journal of Institution of Engineer, India (IEI), Production Div, Vol. 1, Pages 50-57.
  8. Sahil Kajal, V.K. Jain, J. Ramkumar, Leeladhar Nagdeve (2017) Experimental and theoretical investigations into internal magnetic abrasive finishing of a Revolver Barrel, International Journal of Advanced Manufacturing Technology, DOI: 10.1007/s00170-017-1220-2, Vol. 100, Issue 5–8, Pages 1105–1122. (Springer). )
  9. Parameswari Gundavarapu, V.K. Jain, J. Ramkumar, Leeladhar Nagdeve (2017) Experimental investigations into nano finishing of Ti6Al4V flat disc, International Journal of Advanced Manufacturing Technology, DOI: 10.1007/s00170-017-1191-3, Vol. 100, Issue 5–8, Pages 1055–1065. (Springer).
  10. Pankaj Baghel, Shreyansh Singh, Leeladhar Nagdeve V. K. Jain, Nikita Dua Sharma (2015) Preliminary investigations into finishing of artificial dental crown. International Journal of Precision Technology, Vol. 5, Issue 3-4, Pages 229-245, 2015. (InderScience).
  11. Leeladhar Nagdeve, V. Chaturvedi and J. Vimal (2012) Parametric Optimization of Abrasive Water Jet Machining Using Taguchi Methodology, International Journal of Research in Engineering & Applied Sciences (IJREAS) Vol. 2, Issue 6, Pages 23-32. (InterScience)
  12. Leeladhar Nagdeve, V. Chaturvedi and J. Vimal (2012) Implementation of Taguchi Approach for Optimization of Abrasive Water Jet Machining (AWJM) Processes Parameters, International Journal of Instrumentation, Control and Automation (IJICA) ISSN: 2231-1890, Vol-1 Issue-3-4, 2012. (InterScience).Internatioanl Conferences 
  13. Leeladhar Nagdeve, V.K. Jain and J. Ramkumar,“Nano-finishing of freeform/Sculptured surfaces: A review”presented at COPEN9 an International conference on Precision, Meso, Micro and Nano Engineering (COPEN9 2015) conducted during December 10, 2015 to December 12, 2015 at Indian Institute of Technology Bombay, INDIA.
  14. Leeladhar Nagdeve, V.K. Jain and J. Ramkumar,“Experimental Investigations into nano-finishing of freeform surfaces using negative replica of the knee joint” presented in 18th CIRP2016International conference on Electro Physical and Chemical Machining (ISEM XVIII) conducted by the Japan Society of Electrical Machining Engineers (JSEME) Tokyo during 18th-22nd April, 2016 at The University of Tokyo, Tokyo, JAPAN.
  15. Leeladhar Nagdeve, V.K. Jain and J. Ramkumar,“Experimental investigations into Nano finishing of micro-channels”presented at “3rd International conference on Nanotechnology for Better Living” conducted during May 25, 2016 to May 29, 2016 at National Institute of Technology Srinagar-Jammu & Kashmir, INDIA.
  16. Leeladhar Nagdeve, V.K. Jain, J. Ramkumar“Preliminary investigations into nano-finishing of freeform surface(femoral component) using novel finishing fixture”. Presented at 6th International & 27th All India Manufacturing Technology, Design and Research (AIMTDR 2016) Conference during December 16th–18th, 2016, held at College of Engineering(COEP), PuneINDIA.
  17. Pankaj Baghel, Shreyansh Singh, V.K. Jain, Nikita Dua Sharma and Leeladhar Nagdeve.‘Preliminary investigations into finishing of artificial dental crown’ presented at 5th International & 26th All India Manufacturing Technology, Design and Research (AIMTDR 2014) Conference during December 12th–14th, 2014, held at Indian Institute of Technology Guwahati, INDIA. (0.1 credit)
  18. Sahil Kajal, V.K. Jain, J. Ramkumar, Leeladhar Nagdeve Experimental investigations into internal magnetic abrasive finishing of a helical grooves of a revolver barrel” presented at 6th International & 27th All India Manufacturing Technology, Design and Research (AIMTDR 2016) Conference during December 16th–18th, 2016, held at College of Engineering (COEP), PuneINDIA. (0.13 credit)
  19. Leeladhar Nagdeve, V. Chaturvedi and J. Vimal., “Implementation of Taguchi Approach  for Optimization of Abrasive Water Jet Machining (AWJM)  Processes Parameters”International Conference on Mechanical and Industrial Engineering (ICMIE-2012) held at GOA on 8th April, 2012; Organised by InterScience Resrarch Network (IRnet)INDIA.
  20. Amit Pratap Singh, Leeladhar Nagdeve and M. Sagar.,“An Optimization Technique for Selection of Suppliers with Quantitative and Qualitative Criteria Using Genetic Algorithm”International Conference on Mechanical and Industrial Engineering (ICMIE-2012) held at GOA on 8th April, 2012; Organised by InterScience Resrarch Network (IRnet) INDIA.

Expert Talks

Professional Activities

Selection Committee Member

Membership