| |  Login | Alumni Cell |   E-OfficeTraining & Placement |
Edit
Name : Dr. Leeladhar Nagdeve
Designation : Assistant Professor
Department : Department of Mechanical Engineering
Qualification : PhD
Phone : 01133861259
Email ID : ldnagdeve@nitdelhi.ac.in

Position Held

Duration

University/Institute

Designation

Nature of Work

Dec. 2019 - Till Now

NIT Delhi

 

Assistant Professor

 

Research & Teaching

Jan. 2018 - Dec. 2019

SGSITS Indore

Assistant Professor

(TEQIP-III, NPIU Faculty)

Research & Teaching

Qualification-fdjk

 

S. No.

Name of Examination

Name of Institute/ University

Year of Passing

1. 

Doctor of Philosophy

(Mechanical Engineering)

Indian Institute of Technology Kanpur

2018

2.

Master of Technology

(Production Engineering)

Madhav Institute of Technology & Science, Gwalior/ University of  RGPV Bhopal 

2012

         3.

Bachelor of Engineering

(Ind.& Prod. Engg.)

Govt. Jabalpur Engineering College, Jabalpur/ University of RGPV Bhopal

2010

         4.

XII

School for Excellence Balaghat/ MP Board Bhopal

2005

         5.

X

School for Excellence Balaghat/ MP Board Bhopal

2003

Awards & Honors

  1. MHRD Ph. D. Scholarship during Dec. 2012 to Dec. 2018.

Research

Sl. No.

Title of Project

Sponsoring Agency

Amount

Status (Completed / Ongoing)

PI / Co-PI

 
 

1

Development of Portable Near-dry  Electrical Discharge Machine

MHRD/AICTE New Delhi

8.95

Lakhs

Completed

PI

 

2

Fretting Fatigue and Fretting Wear Behavior of Titanium Foam under Simulated Body Fluid Environment

MHRD/AICTE New Delhi

19.38 Lakhs

Completed

Co-PI

 

Administration

  1. Department PG Committee (DPGC): Convener
  2. R&C: Department Coordinator
  3. Laboratory Development: Department Coordinator
  4. Faculty Incharge (Faculty Welfare) from 07/2021 to 10/2021
  5. Photography Club, Student Activities: Co-Coordinator
  6. Sports Club Committee: Member
  7. NIRF, Start-up and Entrepreneurship Committee: Member
  8. Unnat Bharat Abhiyan Committee: Member
  9. Skill India Committee: Coordination

Publications

International Journals:

 

  1. Meena Pant, Leeladhar Nagdeve and Harish Kumar (2021), A Contemporary investigation of additive manufacturing: Techniques, Applications, and Challenges” SADHANA (Indian Academy of Sciences) (Springer) Accepted
  2. T. N. Verma, P. K. Chaurasiya, U. Rajak, K. K. Dhakar, Leeladhar Nagdeve (2021)A numerical study on the effect of engine characteristics by using Ethanol-Moringa-Diesel Fuel” Journal of Engineering Research (JER). Accepted.
  3. Meena Pant, Pritam Pidge, Harish Kumar, Leeladhhar Nagdeve, Girija Moona (2021) Additive manufacturing: The significant role in biomedical and aerospace applications, Indian Journal of Engineering & Materials Sciences, Volume 28, Pages 1-17.
  4. J. Verma, Leeladhar Nagdeve and Harish Kumar (2021) “Tribological investigations into pin-on-disc Tribometer under dry sliding condition at various temperature range, Proceedings of the Institution of Mechanical Engineers, Part E: Journal of Process Mechanical Engineering, DOI: 10.1177/09544089211042954. (SAGE Publication)
  5. A. Gupta, H. Kumar, Leeladhar Nagdeve, P. K. Arora (2021) EDM Parametric Study of Composite Materials: A reviewJournal of Evergreen, Vol. 7, Issue 4, pages, 519-529
  6. Meena Pant, P. Pidge, Leeladhhar Nagdeve, Harish Kumar (2021) A Review of Additive Manufacturing in Aerospace Application, Revue des Composites et des Materiaux Avances, Volume 31, Pages 109-115.
  7. Sudhir Kumar, S. K. Ghoshal, P. K. Arora, Leeladhar Nagdeve (2021) Multi-Variable optimization in Die-Sinking Electrical Discharge Machining of AISI420 stainless steel, Materials and Manufacturing Processes. DOI:10.1080/10426914.2020.1843678, Vol. 36, Issue 5, Pages 572-582,(Taylor and Francis).
  8. Leeladhar Nagdeve, K. K. Dhakar, Harish Kumar (2020) Development of novel finishing tool into Magnetic Abrasive Finishing process of Aluminium 6061, Materials and Manufacturing Processes, DOI: 10.1080/10426914.2020.1767295, Volume 35, Issue 10, Pages 1129-1134 (Taylor and Francis).
  9. Leeladhar Nagdeve, V.K. Jain and J. Ramkumar (2020) Optimization of process parameters in nano-finishing of Co-Cr-Mo alloy knee joint, Materials and Manufacturing Processes, DOI: 10.1080/10426914.2020.1750633, Volume 35, Issue 9, Pages 985-992(Taylor and Francis).
  10. Leeladhar Nagdeve, V.K. Jain and J. Ramkumar (2019) Development of inverse replica fixture for Nano-finishing of Knee Joint using R-MRAFF process, Journal of Micromanufacturing (JMF) doi.org/10.1177/2516598418811460, Vol. 2, Issue 1, Pages 35-41. (SAGE Publications)
  11. Leeladhar Nagdeve, V.K. Jain and J. Ramkumar, (2018) Differential finishing of freeform surfaces (Knee Joint) using R-MRAFF process & negative replica as a fixture, Machining Science and Technology, Vol. 22, Issue 4, Pages 671-695. (Taylor and Francis).
  12. Leeladhar Nagdeve, V.K. Jain and J. Ramkumar, (2018) Nanofinishing of freeform/sculptured surfaces: A Review, Journal of Manufacturing ReviewVol. 5, Issue 6, Pages 1-20. (Scopus).
  13. Leeladhar Nagdeve, V.K. Jain and J. Ramkumar (2017) Preliminary investigations into nano-finishing of freeform surface (femoral component) using inverse replica fixture, International Journal of Advanced Manufacturing Technology, DOI: org/10.1007/s00170-017-1459-7, Vol. 100, Issue 5–8, Pages 1081–1092. (Springer)
  14. Leeladhar Nagdeve, Ajay Sidpara, V.K. Jain and J. Ramkumar (2017) On the effect of relative size of magnetic particles and abrasive particles in MR fluid based finishing process, Machining Science and Technology, Vol. 22 Issue 3, Pages 493-506. (Taylor and Francis).
  15. Leeladhar Nagdeve, Jain V.K., Ramkumar J. (2016) Experimental Investigations into nano-finishing of freeform surfaces using negative replica of the knee joint,  Procedia CIRP 42, Pages 793 – 798. DOI:10.1016/j.procir.2016.02.321. (Elsevier).
  16. Leeladhar Nagdeve, V.K. Jain and J. Ramkumar (2016) Nano-finishing of freeform surfaces: A review, Journal of Institution of Engineer, India (IEI), Production Div, Vol. 1, Pages 50-57.
  17. Sahil Kajal, V.K. Jain, J. Ramkumar, Leeladhar Nagdeve (2017) Experimental and theoretical investigations into internal magnetic abrasive finishing of a Revolver Barrel, International Journal of Advanced Manufacturing Technology, DOI: 10.1007/s00170-017-1220-2, Vol. 100, Issue 5–8, Pages 1105–1122. (Springer). )
  18. Parameswari Gundavarapu, V.K. Jain, J. Ramkumar, Leeladhar Nagdeve (2017) Experimental investigations into nano finishing of Ti6Al4V flat disc, International Journal of Advanced Manufacturing Technology, DOI: 10.1007/s00170-017-1191-3, Vol. 100, Issue 5–8, Pages 1055–1065. (Springer).
  19. Pankaj Baghel, Shreyansh Singh, Leeladhar Nagdeve V. K. Jain, Nikita Dua Sharma (2015) Preliminary investigations into finishing of artificial dental crown. International Journal of Precision Technology, Vol. 5, Issue 3-4, Pages 229-245, 2015. (InderScience).
  20. Leeladhar Nagdeve, V. Chaturvedi and J. Vimal (2012) Parametric Optimization of Abrasive Water Jet Machining Using Taguchi Methodology, International Journal of Research in Engineering & Applied Sciences (IJREAS) Vol. 2, Issue 6, Pages 23-32. (InterScience)
  21. Leeladhar Nagdeve, V. Chaturvedi and J. Vimal (2012) Implementation of Taguchi Approach for Optimization of Abrasive Water Jet Machining (AWJM) Processes Parameters, International Journal of Instrumentation, Control and Automation (IJICA) ISSN: 2231-1890, Vol-1 Issue-3-4, 2012. (InterScience).

 

International Conferences 

 

  1. Mahesh Patel, S. Sangral, M. Jayaprakash, R. S. Yadav, K. Dhakar, and Leeladhar Nagdeve (2021) Mechanical Behavior of Titanium Foam Fabricated Using NH3HCO3 Space Holder through Powder Metallurgy Route”, 6th International Conference on Advanced Production and Industrial Engineering(ICAPIE - 2021)organized by CAPIER, during June 18-19, 2021 at DelhiTechnological University (DTU), Delhi, INDIA
  2. Hansdev Paswan, Harish Kumar and Leeladhar Nagdeve(2021)“Review on Recent Trend in Aluminum Composite”6th International Conference on Advanced Production and Industrial Engineering(ICAPIE - 2021)organized by CAPIER, during June 18-19, 2021 at DelhiTechnological University (DTU), Delhi, INDIA
  3. Subham Sungh, Leeladhar Nagdeve, Harish Kumar and Krishnakant Dhakar (2021)Rice Straw Based Natural Fiber Reinforced Polymer for Sustainable Bio-Composites: A Critical Review”,6th International Conference on Advanced Production and Industrial Engineering(ICAPIE - 2021)organized by CAPIER, during June 18-19, 2021 at DelhiTechnological University (DTU), Delhi, INDIA
  4. Meena Pant, Leeladhar Nagdeve, Harish Kumar,V. C. Pandey (2020) “Review of Recent trends in Additive ManufacturingInternational conferences on INNOVATION IN CYBER PHYSICAL SYSTEMS(ICICPS-2020) , conducted during Oct. 22-23, 2020 at HMR Institute of Technology and Management, New Delhi, INDIA
  5. MVD Sai Kalyan, Harish Kumar, Leeladhar Nagdeve(2020)“Latest trends in Additive Manufacturing” International conferences on optimization Techniques and Recent  Innovation in Mechanical Engineering(ICOTRIME-2020)conducted during Dec. 11- 12, 2020 at Krishna Engineering College, Ghaziabad, INDIA
  6. T. N. Verma, P. K. Chaurasiya, U. Rajak, K. K. Dhakar, Leeladhar Nagdeve(2020) “A numerical study on the effect of engine characteristics by using Ethanol-Moringa-Diesel Fuel” 1st International Conference on Energy, Materials Sciences and Mechanical Engineering (EMSME-2020) conducted during Oct. 30- Nov. 1, 2020at National Institute of Technology Delhi, INDIA
  7. Anant Nigam, Anand Makwana, Raj Sharma, Leeladhar Nagdeve, Krishnakant Dhakar (2019)“Preliminary Experimental investigations into Magnetic Abrasive Finishing of Aluminum Shaft” COPEN11 an International conference on Precision, Meso, Micro and Nano Engineering (COPEN9 2019) conducted during December 12, 2019 to December 14, 2019 at Indian Institute of Technology Indore, INDIA
  8. Leeladhar Nagdeve, V.K. Jain and J. Ramkumar (2016)“Experimental Investigations into nano-finishing of freeform surfaces using negative replica of the knee joint”18th CIRP2016 International conference on Electro Physical and Chemical Machining (ISEM XVIII) conducted by the Japan Society of Electrical Machining Engineers (JSEME) Tokyo during 18th-22nd April, 2016 at The University of Tokyo, Tokyo, JAPAN
  9. Leeladhar Nagdeve, V.K. Jain and J. Ramkumar (2016)“Experimental investigations into Nano finishing of micro-channels” 3rd International conference on Nanotechnology for Better Living” conducted during May 25, 2016 to May 29, 2016 at National Institute of Technology Srinagar-Jammu & Kashmir, INDIA
  10. Leeladhar Nagdeve, V.K. Jain, J. Ramkumar“Preliminary investigations into nano-finishing of freeform surface(femoral component) using novel finishing fixture” 6th International & 27th All India Manufacturing Technology, Design and Research (AIMTDR 2016) Conference during December 16th–18th, 2016, held at College of Engineering (COEP), Pune INDIA
  11. Leeladhar Nagdeve, V.K. Jain and J. Ramkumar, “Nano-finishing of freeform/Sculptured surfaces: A review” presented at COPEN9 an International conference on Precision, Meso, Micro and Nano Engineering (COPEN9 2015) conducted during December 10, 2015 to December 12, 2015 at Indian Institute of Technology Bombay, INDIA.
  12. Pankaj Baghel, Shreyansh Singh, V.K. Jain, Nikita Dua Sharma and Leeladhar Nagdeve.‘Preliminary investigations into finishing of artificial dental crown’ presented at 5th International & 26th All India Manufacturing Technology, Design and Research (AIMTDR 2014) Conference during December 12th–14th, 2014, held at Indian Institute of Technology Guwahati, INDIA.
  13. Sahil Kajal, V.K. Jain, J. Ramkumar, Leeladhar Nagdeve Experimental investigations into internal magnetic abrasive finishing of a helical groove of a revolver barrel” presented at 6th International & 27th All India Manufacturing Technology, Design and Research (AIMTDR 2016) Conference during December 16th–18th, 2016, held at College of Engineering (COEP), Pune, INDIA. 
  14. Leeladhar Nagdeve, V. Chaturvedi and J. Vimal., “Implementation of Taguchi Approach  for Optimization of Abrasive Water Jet Machining (AWJM)  Processes Parameters” International Conference on Mechanical and Industrial Engineering (ICMIE-2012) held at GOA on 8th April, 2012; Organised by InterScience Resrarch Network (IRnet) INDIA.
  15. Amit Pratap Singh, Leeladhar Nagdeve and M. Sagar.,“An Optimization Technique for Selection of Suppliers with Quantitative and Qualitative Criteria Using Genetic Algorithm” International Conference on Mechanical and Industrial Engineering (ICMIE-2012) held at GOA on 8th April, 2012; Organised by InterScience Resrarch Network (IRnet) INDIA.

Expert Talks

Professional Activities

Selection Committee Member

Membership

IEI